The Future Is Here
We may earn a commission from links on this page

A Broken 3D Printer Inspired This Futuristic Fabric

Image for article titled A Broken 3D Printer Inspired This Futuristic Fabric
Photo: Jack Forman/MIT Media Lab

3D printers usually work by extruding long strings of molten plastic onto a surface. When MIT Media Lab researchers spotted a broken printer squirting out plastic erratically, they had an idea: By programming a normal home 3D printer, they could simulate that erratic extrusion and create a sort of light, flexible lace out of hot plastic.

Jack Forman, a graduate student at MIT’s Media Lab, turned these defective prints—called DefeXtilesinto a tulle-like “quasi-textile” that can even be used in clothing.

Advertisement

In fact, Forman created a pleated, wearable skirt by printing it in one piece from a standard printer. When pulled open, the skirt is completely wearable and, dare I say, quite fashionable.

Advertisement
Image for article titled A Broken 3D Printer Inspired This Futuristic Fabric
Photo: Jack Forman/MIT Media Lab
Advertisement

The process works by moving a print head over a surface while extruding plastic at regular intervals. Each time the printer extrudes and moves, it creates a thread; repeat that enough times, and you’ve got a sort of fabric. Because the threads are so pliable, they fold much like traditional cloth.

“In general, what excites me most about this work is how immediately useful it can be to many makers,” Forman said. “Unlike previous work, the fact that no custom software or hardware is neededjust a relatively cheap $250 printer, the most common type of printer usedreally makes this technique accessible to millions of people.”

Advertisement

Forman was also able to print lace by adding flowers and other decorations during the printing process. The real goal, however, is to use these fabrics in health care.

Advertisement

“A particularly exciting future direction is leveraging DefeXtiles to produce low-cost and effective customized surgical meshes that better reinforce organs and tissue after surgery,” said Forman. “3D-printed surgical implants have already been studied with promising results. Additionally, if loaded with antibiotics, such as ciprofloxacin HCl, the degradation would slowly release the antibiotic, preventing infection. Another feature is that the mechanical properties of the mesh could be tuned to match that of the tissue being supported.”

Advertisement